3. Installation
Remove the back cover from the keypad using the supplied special screwĀ driver
Drill 2Ā holes on the wall for the Self tapping screwsĀ and I hole for the cable
Put the supplied rubber bungs to into the twoĀ holes
Fix the back cover firmly on the wall with 2 Self tapping screws
Thread the cable through the cable holeĀ Attach the keypad to the back cover.
- Wiring
Colour | Function | Description |
Pink | BELL_A | Doorbell button one end |
Pink | BELL_B | Doorbell button to the other end |
Green | D0 | WG output D0 |
White | D1 | WG output D1 |
Yellow | OPEN | Exit button one end(the other end connected GND) |
Red | 12V+ | 12V + DC Regulated Power Input |
Black | GND | 12V ā DCĀ Regulated Power Input |
Blue | NO | Relay normally-onĀ end(Connect positive electric lockĀ ā-ā) |
Purple | COM | Relay PublicĀ end, connect GND |
Orange | NC | Relay Closed end(connect negative electric lockā-ā) |
There are no reviews yet.